|
If you are experiencing any of the following errors then you may need
data recovery!
Hard Drive/Ide Errors
1701 1702 1703 1704 1705 1706 1707 1708 1709
1710 1711 1712 1713 1714 1715 1716 1717 1718
1720 1726 1730 1731 1732 1733 1735 1736 1737
1738 1739 1740 1750 1751 1752 1753 1754 1755
1756 1757 1780 1781 1782 1790 1791 Fixed disk general POST error
Drive/controller time-out error Drive seek error
Controller failed Drive sector not found error
Write fault error Drive track O error Head select error
Error Correction Code (ECC) error Sector buffer overrun
Bad address mark Internal controller diagnostics failure
Data compare error Drive not ready Track O indicator failure Diagnostics
cylinder errors
Surface read errors Hard drive type error Bad diagnostics cylinder Data
compare error
Controller error BIOS undefined error return Bad command error Data
corrected error
Bad track error Bad sector error Bad initialization error Bad sense
error Drive verify failure Drive read failure
Drive write failure Drive random read test failure Drive seek test failure
Controller failure Controller Error Correction Code (ECC) test failure
Controller head select failure Seek failure; drive 0 Seek failure; drive
1 Controller test failure Diagnostic cylinder read error; drive 0 Diagnostic
cylinder read error; drive 1
--------------------------------------------------------------------------------
ESDI Drive and Controller Error Codes
[Back to Top of Page]
10450 10451 10452 10453 10454 10455 10456 10461 10462 10463 10464
10465 10466 10467 10468 10469 10470 10471 10472 10473 10480 10481
10482 10483 10484 10485 10486 10487 10488 10489 10490 10491 10499 Read/write
test failed
Read verify test failed Seek test failed Wrong device type indicated
Controller test failed sector buffer test
Controller failure Controller diagnostic command failure Drive format
error Controller head select error
Drive read/write sector error Drive primary defect map unreadable Controller;
Error Correction Code (ECC) 8-bit error Controller; Error Correction
Code (ECC) 9-bit error Drive soft seek error Drive hard seek error Drive
soft seek error count exceeded Controller attachment diagnostic error
Controller wrap mode interface error Controller wrap mode drive select
error Read verify test errors Seek failure; drive O Seek failure; drive
1 Controller transfer acknowledge error Controller reset failure
Controller; head select 3 error Controller; head select 2 error Controller;
head select 1 error Controller; head select O error
Controller; read gate Controller; write gate Diagnostic area read error;
drive 0 Diagnostic area read error; drive 1 Controller failure
--------------------------------------------------------------------------------
SCSI Drive and Host Adapter Error Codes
[Back to Top of Page]
096xxxx
112xxxx
113xxxx
210xxxx SCSI adapter with cache (32-bit) errors
SCSI adapter (16-bit without cache) errors
System board SCSI adapter (16-bit) errors
SCSI fixed disk errors
Call: (727)642-5521 for 24 hour a day 7 days a week
help.
|
